| More About U.V. Plus for Hardwood Decks | |
| Description | U.V. Plus for Hardwood Decks is an oil based product that protects and conditions woods such as Ipe’ and Mahogany while also maintaining a natural appearance. It has been produced with professional results in mind, providing exceptional penetration, water repellency and U.V. protection. |
| Features | * Trans-Oxide pigments to protect the wood from the sun’s harmful rays. * Blend of natural and synthetic oils that condition and enhance the beauty of wood. * Long lasting water repellency * High solids content - over 40% * Low odor * Reduces warping, shrinking and cracking of wood. * VOC compliant |
| Wood Preparation | * Always clean gray or dirty wood before applying UV Plus. Use Messmer’s Deck Cleaner. * Allow wood to completely dry for at least 24 to 48 hours. * Previously stained or treated wood should be sufficiently weathered to allow for complete penetration of U.V. Plus. |
| Product Application | * Read all label directions before using product. * May be applied with low pressure spray, brush or roller. * Apply ONE coat of U.V. Plus For Hardwoods. Brush out any puddles or runs. Excess product not absorbed within 5 minutes should be wiped down with a clean rag * Product will dry in 24 to 48 hours depending on temperature, type of wood and humidity. |
| Coverage | Approximately 300 square feet per gallon on dense hardwoods. |
| Finish | Natural look when properly applied. |
| Color | Natural |
| Pricing | $60.90 Per Gallon
 
|
U.V. Plus for Hardwood Decks is an oil based product that protects and conditions woods such as Ipe and Tigerwood while also maintaining a natural appearance. It has been produced with professional results in mind, providing exceptional penetration, water repellency and U.V. protection.
Find Out More About U.V. Plus for Hardwood Decks »
