 |
Tigerwood Decking Products
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TIGERWOOD DECKING PRICES - PER LINEAR FOOT | ||
| Nominal Dimension (Rollover profile for a more detailed diagram) |
Net "Finished" Dimension | Price (Per linear ft.) |
1 x 4  |
3/4" x 3 1/2" | $1.41  |
1 x 4 Pregrooved  |
3/4" x 3 1/2" Pregrooved on both edges for IPE CLIP® ExtremeKD™ |
$1.81
|
1 x 4 T&G*  |
11/16" x 3 " | $2.16
|
1 x 6  |
3/4" x 5 1/2" | $2.00
|
1 x 6 Pregrooved  |
3/4" x 5 1/2" Pregrooved on both edges for IPE CLIP® ExtremeKD™ |
$2.40
|
1 x 6 T&G*  |
11/16" x 5 " | $2.75
|
5/4 X 4  |
1" X 3 1/2" | $2.20
|
5/4 X 4 Pregrooved  |
1" X 3 1/2" Pregrooved on both edges for IPE CLIP® ExtremeKD™ |
$2.64
|
5/4 x 4 T&G*  |
15/16" X 3" Porch Decking | $3.29 |
5/4 x 6  |
1" x 5 1/2" | $2.50
|
5/4 x 6 Pregrooved  |
1" x 5 1/2" Pregrooved on both edges for IPE CLIP® ExtremeKD™ |
$2.90
|
2 X 2  |
1 1/2" X 1 1/2" | $1.50
|
2 X 4  |
1 1/2" X 3 1/2" | $3.90
|
2 X 6  |
1 1/2" X 5 1/2" | $5.50
|
4 X 4  |
3 1/2" X 3 1/2" | $8.50
|
Rail Cap (Lg. Handrail)  |
1 7/16" X 5 3/8" | $6.00
|
Small Handrail  |
1 7/16"" x 3" | $4.50
|
Subrail 
|
1" X 3 1/2" | $3.62
|
|
Post Caps
 |
1 1/2" X 5 1/2" X 5 1/2" | $27.50 ea.
|
| *Tongue & Groove is for use under covered porches only. Decking sold in even and odd lengths between 6' to 20'. We can pull your order to specific lengths. Add an additional upcharge of $0.40 per lineal foot for 15+ foot lengths. Add $0.60 per lineal foot for 19' & 20' lengths. |
||
Tigerwood decking is great for other outdoor projects in addition to decking.
Above: Tigerwood barbecue cart.
| City, State | Time | City, State | Time |
| Baltimore , Maryland (MD) | 1-2 Days | Minneapolis, Minnesota (MN) | 3-5 Days |
| Boston, Massachusetts (MA) | 2-3 Days | Nashville, Tennessee (TN) | 2-3 Days |
| Charlotte, North Carolina (NC) | 1-2 Days | Orlando, Florida (FL) | 2-3 Days |
| Chicago, Illinois (IL) | 2-4 Days | Philadelphia, Pennsylvania (PA) | 1-2 Days |
| Cincinnati, Ohio (OH) | 1-2 Days | Pittsburgh, Pennsylvania (PA) | 1-2 Days |
| Dallas, Texas (TX) | 3-4 Days | Raleigh, North Carolina (NC) | 1-2 Days |
| Denver, Colorado (CO) | 4-5 Days | Richmond, Virginia (VA) | 1-2 Days |
| Greenville, South Carolina (SC) | 1-2 Days | Salt Lake City, Utah (UT) | 4-5 Days |
| Kansas City, Missouri (MO) | 3-4 Days | San Diego, California (CA) | 4-5 Days |
| Long Island, New York (NY) | 1-3 Days | San Francisco, California (CA) | 4-5 Days |
| Los Angeles, California (CA) | 4-5 Days | Seattle, Washington (WA) | 5+ Days |
| Memphis, Tennessee (TN) | 2-3 Days | Tampa, Florida (FL) | 2-3 Days |
| Shipping Times May VARY... Please Contact Us For Exact Shipping Times and Rates | |||
 Example of pregrooved Tigerwood decking with a Ipe Clip® ExtremeKD™. |
 Assembled Tigerwood deck boards with Ipe Clip® ExtremeKD™ hidden deck fastener system. |
 |
||
  Ipe Brown. |
  Patina Grey. |
  Shadowline Black. |
| ROLLOVER THUMBNAILS TO SEE LARGER PHOTO | ||
| Premium Grade Stainless Steel Reinforced For Kiln Dried Decking or Composite Materials | ||
| COMPONENTS (175) IPE CLIP® EXTEME KD™ Hidden Deck Fasteners (190) Stainless Steel Torx Drive Screws (12) 3/8" Tapered Ipe Plugs  (1) 1/8" High Speed Drill Bit (1) Screw Gun Driver Bit (3) 1/4" Spacer Tools (1) Instruction Sheet |
DESCRIPTION IPE CLIP® EXTREME KD™ Fastener Kit - These Fasteners come with stainless steel washers molded inside for increased holding power. Designed specifically for kiln dried decking, such as our Tigerwood Decking. Click HERE to see more about the IPE CLIP® EXTREME KD™ Fastener Kit |
|
| Price: $119.00
|
||
| CLICK HERE FOR MORE INFO | ||
 |
||
 |
||
| Hardwood Wrench™ - The brand new self-locking deck board straightening tool. This tool is used to hold deck boards straight while fasteners are being installed. It cam locks into place and applies much more bending power than other methods of straightening deck boards. For more info click > Deck Board Straightening Tool | ||
| Price: $199
|
 |
Ipe Oil™ Hardwood Deck Finish Specially formulated for exotic hardwood decking... |
| Description | Ipe Oil™ is an oil based product which is specially formulated for Exotic Hardwood Decks. This means that it protects and conditions woods such as Ipe, Garapa, Tigerwood, and Cumaru while also maintaining a natural appearance. Ipe Oil™ was developed with professional results in mind, providing exceptional penetration, water repellency and U.V. protection. |
| Features | * Trans-Oxide pigments to protect the wood from the sun’s harmful rays. |
| Wood Preparation | * Always clean gray or dirty wood before applying UV Plus. Use Messmer’s WD Wood and Deck Renewer, available in liquid and powder concentrates. * Allow wood to completely dry for at least 24 to 48 hours. * Previously stained or treated wood should be sufficiently weathered to allow for complete penetration of Ipe Oil™. |
| Product Application | * Read all label directions before using product. * May be applied with low pressure spray, brush or roller. * Apply ONE coat of Ipe Oil™ Hardwood Deck Finish. Brush out any puddles or runs. Excess product not absorbed within 5 minutes should be wiped down with a clean rag * Product will dry in 24 to 48 hours depending on temperature, type of wood and humidity. |
| Coverage | Approximately 300 square feet per gallon on dense hardwoods. |
| Finish | Natural look when properly applied... with added grain enhancment of Tigerwood Decking. |
| Color | Natural |
| Pricing | $52.00 Per Gallon |
 |
MESSMER'S U.V. PLUS FOR HARDWOODS NATURAL WOOD FINISH |
| Description | U.V. Plus for Hardwood Decks is an oil based product that protects and conditions woods such as Ipe’ and Mahogany while also maintaining a natural appearance. It has been produced with professional results in mind, providing exceptional penetration, water repellency and U.V. protection. |
| Features | * Trans-Oxide pigments to protect the wood from the sun’s harmful rays. * Blend of natural and synthetic oils that condition and enhance the beauty of wood. * Long lasting water repellency * High solids content - over 40% * Low odor * Reduces warping, shrinking and cracking of wood. * VOC compliant |
| Wood Preparation | * Always clean gray or dirty wood before applying UV Plus. Use Messmer’s WD Wood and Deck Renewer, available in liquid and powder concentrates. * Allow wood to completely dry for at least 24 to 48 hours. * Previously stained or treated wood should be sufficiently weathered to allow for complete penetration of U.V. Plus. |
| Product Application | * Read all label directions before using product. * May be applied with low pressure spray, brush or roller. * Apply ONE coat of U.V. Plus For Hardwoods. Brush out any puddles or runs. Excess product not absorbed within 5 minutes should be wiped down with a clean rag * Product will dry in 24 to 48 hours depending on temperature, type of wood and humidity. |
| Coverage | Approximately 300 square feet per gallon on dense hardwoods. |
| Finish | Natural look when properly applied. |
| Color | Natural |
| Pricing | $52.00 Per Gallon
|
 |
Messmer's Wood and Deck Cleaner and Brightener (Part A and B) |
 |
| Description | Messmer's Wood and Deck Cleaner and Brightener (Part A and B) powder concentrates are specially formulated to clean and brighten exterior wood decks, fences, log homes, and other exterior wood projects. | |
| Features |
* Cleans and brightens exterior wood * Use before staining wood * Excellent for deck maintenance * Biodegradable, safe and easy to use * Maximum strength |
|
| Wood Preparation/Product Application |
For cleaning only, or for hardwood, pine, or pressure treated wood, use just Wood & Deck Cleaner (Part A): After waiting for several minutes for product to dissolve and activate, apply with a mop or sprayer. Let the product sit on the deck surface for at least 10 minutes, making sure to keep the deck wet with more product if it begins to dry out. Scrub the deck boards with the grain of the wood. Rinse thoroughly with clean water. Allow the deck to dry for at least a day or two in good weather before applying any stain or finish. For cleaning and brightening of redwood and cedar, use both Wood & Deck Cleaner (Part A) and Wood & Deck Brightener (Part B): After waiting for several minutes for product to dissolve and activate, apply with a mop or sprayer. Let the product sit on the deck surface for at least 10 minutes, making sure to keep the deck wet with more product if it begins to dry out. Scrub the deck boards with the grain of the wood, then rinse thoroughly with clean water. Mix Wood and Deck Brightener in warm water according to label directions. Apply to the wet wood previously cleaned by Wood and Deck Cleaner. Allow the Brightener to sit on the surface for 15 minutes, keeping the deck wet with more product if necessary. Rinse thoroughly with clean water. Allow the deck to dry at least a day or two in good weather before applying any stain or finish. |
|
| Finish | Cleans and brightens exterior wood | |
| Pricing | Messmers Deck Cleaner Powder Form: $15.00/Package Messmers Deck Brightener Powder Form: $15.00/Package
|
|
